Presonus CDL18S Compact Powered Subwoofer
Original price was: $2,859.95.$2,199.95Current price is: $2,199.95.
Presonus CDL18S Compact Powered Subwoofer
1 X 18-INCH ACTIVE SUBWOOFER
The PreSonus CDL18s subwoofer provides articulate low-end performance, Dante connectivity, and a visually stunning appearance in a compact form factor—making it a great choice to serve as the low-frequency foundation for mobile and installed applications alike. Combined with its integrated rigging hardware and pole mount, the CDL18s is a terrific companion to the PreSonus CDL12, naturally extending low-frequency reproduction with coherent phase response and an efficient, powerful design that provides the flexibility demanded by modern sound reinforcement applications.
- Single 18-inch LF transducer with a 4-inch voice coil
- Built-in PreSonus WorxAudio PDA-1000 1000-watt Class D power amplifier
- Dante enabled for network access and streamlined system cabling
- Network accessible via PreSonus WorxControl software
- Ideal for use as a portable PA system or for small to midsize installed sound applications
- Integrated pole mount for up to two CDL12 "top box" loudspeakers when used as a portable SR system
- Flyable or ground-stacked enclosures: can be flown two deep with up to five CDL12 cabinets beneath for installed applications, or five deep with CDL18s' alone
- Robust Neutrik powerCon In and Out connectivity
Configuration: Active Subwoofer
Frequency Response (-3 dB): 42 Hz – 150 Hz (Variable)
Frequency Response (-10 dB): 36 Hz – 144 Hz
Maximum Peak SPL: 135 dB
Crossover Frequency: 90 Hz
Transducer:
LF Transducer: 1x18" Ferrite magnet
Voice Coil Diameter: 4"
Amplifier:
Type: Class D
Total Power Output: 2000W Peak, 1000W Program (500W RMS)
LF Power: 2000W Peak, 1000W Program (500W RMS)
Cooling: Free air convection
Rated THD: <0.05% (20 Hz - 20 kHz)
Dynamic Range: 119 dB (A-weighted)
Bandwidth: 20 Hz - 20 kHz
Connections and Controls:
Input Channels: 1 Line
Input Connector Types: (XLR)
Line Input Impedance: 40 kΩ
Maximum Input: +4 dBu
Output Connector: 1 XLR, Direct out
Controls: Preset Select, Polarity Invert
Indicators: Over Temperature, Signal, -3 dB, Limiter, Clip, Network Status
DSP:
Effects: Compression, Polarity Invert, Limiting, Delay, 8-band EQ and preset selection via WorxControl
Bit Depth: 24-bit
Sample Rate: 48 kHz
Enclosure:
Material: 15 mm Eucalyptus plywood
Finish: Chemline Polyurea
Grille: Powder-coated steel
Dimensions (HxWxD): 23.2” x 20.8” x 24” (590 mm x 529 mm x 610 mm)
Unit Weight: 105 lbs. (47.6 kg)
Handles: 2 (One on each side)
Safety
Amplifier Protection: Over-current, DC, over/under-voltage, over-temperature, high frequency
Transducer Protection: Limiter
Power:
AC Power Input: 90-260V~, 50-60 Hz
AC Power Consumption (1/8 Power): 4.2 Amps
Suspension Mounting:
Rigging Points: M20 Threaded pole receiver, Integrated rigging (10:1 load)
Optional Accessories:
Rigging: CDL Rigging Grid, CDL Rigging Extension Bar, CDL Rigging Sling
Other: ULT18-CSTR 4” Caster Kit, CDL18s-Cover Dust Cover
- Dimensions and Weight in Packaging
- Base Item
- Shipping Weight: 120 lbs
- Shipping Dimensions: 30 x 30 x 30 in
- Manufacturer Part Number (MPN): PRS CDL18S
Description
Presonus CDL18S Compact Powered Subwoofer
1 X 18-INCH ACTIVE SUBWOOFER
The PreSonus CDL18s subwoofer provides articulate low-end performance, Dante connectivity, and a visually stunning appearance in a compact form factor—making it a great choice to serve as the low-frequency foundation for mobile and installed applications alike. Combined with its integrated rigging hardware and pole mount, the CDL18s is a terrific companion to the PreSonus CDL12, naturally extending low-frequency reproduction with coherent phase response and an efficient, powerful design that provides the flexibility demanded by modern sound reinforcement applications.
